Filter
Top Products
68 – ENGLISH
Option1 settings (continued)
If “3COLORS” or “7COLORS”
was selected in step 2.
3. Press ENTER.
The “COLOR MATCHING: 3COLORS” or
“COLOR MATCHING: 7COLORS” screen will
be displayed.
4. Press ▲▼ to select “R”, “G” and
“B”.
5. Press ENTER.
6. Press ◄► to adjust the values.
These values can be adjusted from 0 to 2048.
Note
The effects of correcting the adjustment color:
When tuning the correction color that is the same
as the adjustment color: the brightness of the
adjustment color changes.
When tuning the correction color RED: RED is
added to or reduced from the adjustment color.
When tuning the correction color GREEN: GREEN
is added to or reduced from the adjustment color.
When tuning the correction color BLUE: BLUE is
added to or reduced from the adjustment color.
This adjustment should be carried out by a person
who is familiar with the projector or by a service
person because a high level of skill is required to
make successful adjustment.
Pressing DEFAULT will restore the factory defaults
for all items.
When any setting other than “OFF” has been
selected for color matching, the “COLOR TEMP.”
setting is fixed at “USER1”.
■
•
•
•
•
•
•
ENTER
COLOR MATCHING:3COLORS
R
G
B
AUTO TESTPATTERN
MENU SELECT
SUB MENU
ON
ENTER
COLOR MATCHING:3COLORS
R
G
B
AUTO TESTPATTERN
MENU SELECT
SUB MENU
ON
3COLORS:R
R
G
B
MENU SELECT
ADJUST
2048
0
0
3COLORS:R
R
G
B
MENU SELECT
ADJUST
2048
0
0
Adjusting the color matching
using a colorimeter
The “R (Red)”, “G (Green)”, “B (Blue)”, “Cy (Cyan)”,
“Mg (Magenta)”, “Ye (Yellow)” and “Wh (White)”
colors can be changed to the desired hues using
a colorimeter which is capable of measuring the
chromaticity coordinates and luminance.
Inputting the current luminance
and chromaticity coordinates
1. Press ▲▼ to select
“COLOR
MATCHING”
.
2.
Press ◄► to select “MEASURE”.
3. Press ENTER.
The “MEASURE MODE” screen will be
displayed.
4. Press ▲▼ to select “MEASURED
DATA”
.
5. Press ENTER.
The “MEASURED DATA” screen will be displayed.
■
•
•
OPTION1
COLOR MATCHING
LARGE SCREEN CORRECTION
AUTO SIGNAL
AUTO SETUP
BACK COLOR
DVI EDID
AUX DVI EDID
P IN P
FUNC1
OSD POSITION
OSD MEMORY
MENU SELECT
CHANGE
OFF
OFF
OFF
BLUE
EDID2(PC)
EDID2(PC)
OFF
P IN P
2
ON
OPTION1
COLOR MATCHING
LARGE SCREEN CORRECTION
AUTO SIGNAL
AUTO SETUP
BACK COLOR
DVI EDID
AUX DVI EDID
P IN P
FUNC1
OSD POSITION
OSD MEMORY
MENU SELECT
CHANGE
OFF
OFF
OFF
BLUE
EDID2(PC)
EDID2(PC)
OFF
P IN P
2
ON
ENTER
MEASURE MODE
MODE
MEASURED DATA
TARGET DATA
AUTO TESTPATTERN
MENU SELECT
SUB MENU
709MODE
ON
ENTER
MEASURE MODE
MODE
MEASURED DATA
TARGET DATA
AUTO TESTPATTERN
MENU SELECT
SUB MENU
709MODE
ON
MEASURED DATA
Bk
R
G
B
MENU SELECT
ADJUST
Y
x
y
Y
x
y
Y
x
y
Y
x
y
1/2
2
0.350
0.360
300
0.670
0.330
2500
0.350
.0630
200
0.150
0.050
MEASURED DATA
Bk
R
G
B
MENU SELECT
ADJUST
Y
x
y
Y
x
y
Y
x
y
Y
x
y
1/2
2
0.350
0.360
300
0.670
0.330
2500
0.350
.0630
200
0.150
0.050