Filter
Top Products
[PICTURE] menu
ENGLISH
- 45
Settings
Note
z
You cannot adjust menu items that are displayed in grey
during split adjustment.
z
The [KEYSTONE] of [POSITION] becomes inactive
during split adjustment.
z
When a 3D signal is being input (including converting 2D
to 3D), the [SPLIT ADJUST] cannot be executed.
[ADVANCED MENU]
You can perform more detailed image adjustment
manually.
Press the <ENTER> button
z
The [ADVANCED MENU] menu is displayed.
ADVANCED MENU
GAMMA ADJUSTMENT
CONTRAST R
CONTRAST G
CONTRAST B
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
NR
MPEG NR
FRAME CREATION
COLOR MANAGEMENT
x.v.Color
DETAIL CLARITY
ADVANCED 1
MODE1
NORMAL
0
0
0
0
0
0
0
0
+3
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
■
[GAMMA ADJUSTMENT]
You can make detailed adjustments to the light intensity
of each input signal level by using the [ADVANCED1] -
[ADVANCED8] mode, or adjust at 3 levels (high, mid, low)
by using the [SIMPLE] mode.
Note
z
You can only carry out the [GAMMA ADJUSTMENT]
through either the [ADVANCED1] - [ADVANCED8] or
[SIMPLE] mode. Both modes cannot be used at the
same time.
●Adjusting the gamma
(when [ADVANCED1] – [ADVANCED8] is
selected in the [ADJUSTMENT MODE])
1) Press the
▲▼
buttons to select
[GAMMA ADJUSTMENT], and press the
<ENTER> button.
z
The [GAMMA ADJUSTMENT] menu appears.
2) Press the
▲▼
buttons to select
[ADJUSTMENT MODE], and then press
the
◄►
buttons to select any one from
[ADVANCED1] through [ADVANCED8].
GAMMA ADJUSTMENT
ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
GAMMA LOW
START ADJUSTMENT
GAMMA NAME CHANGE
INITIALIZE
ADVANCED1
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION