Filter
Top Products
[3D SETTINGS] menu
68 -
ENGLISH
Settings
5) Press the ▲▼◄► buttons to specify the
location of the required character to enter
and press the <ENTER> button.
z
You can enter up to 16 characters.
z
Select [ALL DELETE] and press the <ENTER>
button to erase all input text. If you press the
<DEFAULT> button on the remote control, you
can erase the character currently selected by
the cursor in the input box.
6) Press the ▲▼◄► buttons to select [OK].
7) Press the <ENTER> button.
Note
z
Press the <ENTER> button without entering any text to
keep the default name ([MEMORY1-3]).
●
[PICTURE BALANCE MEMORY LOAD]
You can access the details saved through [PICTURE
BALANCE MEMORY SAVE].
1) Press the ▲▼ buttons to select [MEMORY
LOAD] and press the <ENTER> button.
z
The [PICTURE BALANCE MEMORY LOAD]
menu is displayed.
PICTURE BALANCE MEMORY LOAD
MEMORY1
MEMORY2
MEMORY3
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
2) Press the ▲▼ buttons to select the
memory name to be called and press the
<ENTER> button.
z
The video adjustments for the recalled memory
name are switched to.
Note
z
If there are no settings saved in [PICTURE BALANCE
MEMORY SAVE] or if all memory entries have been
deleted with [PICTURE BALANCE MEMORY DELETE],
[PICTURE BALANCE MEMORY LOAD] is not displayed.
●
[PICTURE BALANCE MEMORY DELETE]
You can delete the details saved using [PICTURE
BALANCE MEMORY SAVE].
1) Press the ▲▼ buttons to select [MEMORY
DELETE] and press the <ENTER> button.
z
The [PICTURE BALANCE MEMORY DELETE]
menu is displayed.
PICTURE BALANCE MEMORY DELETE
MEMORY1
MEMORY2
MEMORY3
ALL DELETE
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
2) Press the ▲▼ buttons to select the
memory name to be deleted and press the
<ENTER> button.
z
Press the ▲▼ buttons to select [ALL DELETE]
to delete all the details saved using [PICTURE
BALANCE MEMORY SAVE].
z
A [PICTURE BALANCE MEMORY DELETE]
conrmation message is displayed.
PICTURE BALANCE MEMORY DELETE
DELETE THE MEMORY 1 DATA.
CANCELOK
3) Select [OK] with the ◄ ► buttons.
4) Press the <ENTER> button.