Filter
Top Products
[OPTION] menu
82 -
ENGLISH
Settings
■
[POWER ON LINK]
Specify whether or not to switch the power of the projector
on when it is in standby by operating external devices.
Switch settings Switch settings
[NO] Inactive
[YES]
Switch projector power on along
with external devices
Note
z
Depending on the external device, the projector may
automatically turn on when some functions of the
connected devices are used. (Only in standby)
z
Due to the projector’s characteristics, it takes time
before projection begins. Please be aware that video
may already have started by the time the projector is
operating fully.
■
[POWER OFF LINK]
Specify whether to switch the power off for external devices
when this projector is set to standby.
Switch settings Switch settings
[YES]
Switch the power of external
devices off along with this
projector
[NO]
Do not switch the power of
external devices off along with
this projector
Note
z
This function works even if the projector enters standby
mode automatically through the [SLEEP] function.
z
There are cases where some external devices may
not be switched off depending on their status (currently
recording etc.)
■
[ENERGY SAVING MODE]
Specify whether or not to switch the mode of external
devices to the mode with minimum power consumption
when the projector is set to standby.
Switch settings Switch settings
[QUICK
START]
Do not switch
[SAVE]
Switch the mode of external
devices to the mode with
minimum power consumption
Note
z
This function works when [POWER OFF LINK] is set to
[YES].
z
Depending on the external devices, when the projector
is turned on power consumption may increase even in
[ENERGY SAVING MODE] mode in order to achieve
faster start up.
■
[UNUSED DEVICE ENERGY SAVE]
Specify whether or not to keep the power on for external
devices selected for input and switch the power off for
external devices not selected for input.
If you select [YES (WITH PROMPT)], a message is
displayed before the function operates.
Switch settings Switch settings
[NO (STAY
ON)]
Maintain the power on state of
devices for which input is not
selected
[YES (WITH
PROMPT)]
After a conrmation message is
displayed, devices for which the
input is not selected are set to
standby mode
[YES (NO
PROMPT)]
Devices for which the input is not
selected are set to standby mode
Note
z
This function may not work properly depending on the
external device.