Filter
Top Products
[PICTURE] menu
ENGLISH
- 51
Settings
■
[CONTRAST]
You can adjust color temperatures centering mainly on
white.
R (RED), G (GREEN), B (BLUE)
-1 +1
[ADVANCED MENU] menu items
Default
setting
[CONTRAST R] 0
[CONTRAST G] 0
[CONTRAST B] 0
z
Setting range: -32 to +32
■
[BRIGHTNESS]
You can adjust color temperatures centering mainly on black.
R (RED), G (GREEN), B (BLUE)
-1 +1
[ADVANCED MENU] menu items
Default
setting
[BRIGHTNESS R] 0
[BRIGHTNESS G] 0
[BRIGHTNESS B] 0
z
Setting range: -16 to +16
■
[NR]
You can eliminate the noise that occurs when the input
signal deteriorates.
Weaken Strengthen
z
Setting range: 0 to +3
■
[MPEG NR]
You can eliminate the noise that occurs upon projection for
videos that use MPEG compression.
Weaken Strengthen
z
Setting range: 0 to +3
Attention
z
Use a strong setting when projecting an MPEG video.
z
COMPUTER (RGB) signal is not supported.
■
[FRAME CREATION]
You can activate the rendering system for fast motion
frames with fewer afterimage.
Switch settings Switch settings
[OFF] [MODE1]
[MODE3] [MODE2]
[OFF] Deactivate
[MODE1] Setting for a standard image
[MODE2] Setting for a theater image
[MODE3] Setting for a fast moving image
Note
z
With some of the images, it might be difcult to see a
difference in result.
z
If [FRAME CREATION] is set to active, video may be
delayed in some cases. In this case, select [OFF].
z
This cannot be set to active when [2D TO 3D] (
page 69)
is enabled.