Filter
Top Products
TEMP and LAMP Indicators
86 -
ENGLISH
Maintenance
■
Lamp indicator <LAMP>
Indicator
status
Illuminated red Flashing red
Problem
Time to replace the lamp unit. Illuminates when
the lamp unit has reached its maximum usage
period of 3 800 hours (when [LAMP POWER]
is set to [NORMAL]).
Lamp circuit failure, abnormal function or lamp unit
is damaged.
Cause
A message suggesting lamp replacement
is displayed when power is turned on.
The power may
have been turned on
immediately after being
turned off.
Lamp circuit failure,
abnormal function or
lamp unit is damaged.
Solution Replace the lamp unit.
(
page 91)
Let the lamp unit cool
down and turn on the
power.
Press the <OFF> side
of the <MAIN POWER>
switch to turn off the
power as described
in the “Switching off
the power” procedure
(
page 30)
and contact
your dealer.
Note
z
If the <LAMP> indicator is illuminated or ashes despite taking the actions above, please contact an Authorized Service
Center to have your projector repaired.