Filter
Top Products
[PICTURE] menu
ENGLISH
- 53
Settings
z
Adjusting the selected color (when
[RGBCMY] is selected for [ADJUSTMENT
MODE])
Select the color from 6 different color types ([RED],
[GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW]) and
adjust [COLOR], [TINT] and [BRIGHTNESS].
1) Press the ◄► buttons to select [RGBCMY]
in [ADJUSTMENT MODE].
COLOR MANAGEMENT
PROFILE
ADJUSTMENT MODE
START ADJUSTMENT
LOG
NORMAL
RGBCMY
2) Press the ▲▼ buttons to select [START
ADJUSTMENT] and press the <ENTER>
button.
3) Press the ▲▼ buttons to select your
desired color and press the <ENTER>
button.
RGBCMY ADJUSTMENT
RED
GREEN
BLUE
CYAN
MAGENTA
YELLOW
z
Menu (B) and the base color (C) is displayed.
COLOR
TINT
BRIGHTNESS
RED
0
0
0
RETURN
DEFAULT
SELECT
ENTER
Screen
4) Press the ▲▼ buttons to select a menu
item and the ◄► buttons to adjust each
item level.
[COLOR]
Adjust the vividness of the
color.
z
Setting range:
−30 to +30
[TINT]
Adjust the color tone.
z
Setting range:
−30 to +30
[BRIGHTNESS]
Adjust the brightness of the
color.
z
Setting range:
−20 to +20
z
The default setting for each item is [0].
After adjusting, the post-adjustment color (D) is
displayed.
COLOR
TINT
BRIGHTNESS
RED
0
0
0
RETURN
DEFAULT
SELECT
ENTER
Screen
5) Press the <ENTER> button.
z
[PROCESSING] message is displayed for a few
seconds and the result is stored in [LOG].
You can store up to 6 different color adjusted
images under [LOG]. Press the <RETURN>
button to adjust the other colors. Repeat from
step 3) to store more adjustments.
6) Press the <RETURN> button or <MENU>
button twice.
z
This returns you to the [COLOR
MANAGEMENT] menu.
Note
z
Base color (C) and post-adjustment color (D) (displayed
when [ADJUSTMENT MODE] is set to [RGBCMY]), are
intended to be guide colors only.
●
Editing/deleting logs
You can edit or delete stored logs.
Press the ▲▼ buttons to select [LOG] and
press the <ENTER> button.
z
The [LOG] menu is displayed.