Filter
Top Products
[PICTURE] menu
48 -
ENGLISH
Settings
c. Adjusting the output level
z
If you press the ▲▼ buttons, you can adjust
the output level of the currently selected point.
z
Output level can be adjusted for each color on
the [Y][R][G][B] screen.
Ex: When the ▲ button is pressed on [Y].
ADVANCED ADJUST
GAMMA PRESET
REFERENCE POINTS
0.0
ON
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
0%
POINT 8
INPUT OUTPUT
50% 100%
40% +30
ADVANCED ADJUST
GAMMA PRESET
REFERENCE POINTS
0.0
ON
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
0%
POINT 8
Y R G B
INPUT OUTPUT
50% 100%
40% 0
Move above
d. Matching the output level to the reference point
z
In the screen displayed in 4), press the ▲ ▼
buttons to place the cursor on [REFERENCE
POINTS], and then press the ◄► buttons to switch
to [ON].
ADVANCED ADJUST
GAMMA PRESET
REFERENCE POINTS
0.00
ON
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
0%
POINT 8
Y R G B
INPUT OUTPUT
50% 100%
40% 0
z
If you display the adjustment screen when
[REFERENCE POINTS] is set to [ON], the
reference points are displayed on the screen.
ADVANCED ADJUST
GAMMA PRESET
REFERENCE POINTS
0.00
ON
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
0%
POINT 8
Y R G B
INPUT OUTPUT
50% 100%
40% -16
Reference points (gray)
z
After selecting any one of [Y], [R], [G], or [B] in the
screen displayed in 5), you can match the output
level of the point selected with the ▲▼ buttons with
the reference point.
ADVANCED ADJUST
GAMMA PRESET
REFERENCE POINTS
0.00
ON
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
0%
POINT 8
Y R G B
INPUT OUTPUT
50% 100%
40% -6
z
By matching the output level of the currently
selected point with the reference point, the gamma
value can be created by combining two gamma
values, such as by setting [GAMMA PRESET] to
[+0.40] and [+0.30].
z
You can refresh the reference points by pressing
the <FUNCTION> button of the remote control.
OPERATION MODE
RESET
(RESET ALL: 3 sec)
OUTPUT ADJ. INPUT ADJ.
RETURN
SET AS NEW REF.
CHANNEL
CHANGE