Filter
Top Products
[PICTURE] menu
ENGLISH
- 59
Settings
5) Press the ▲▼◄► buttons to select [OK].
6) Press the <ENTER> button.
Note
z
Press the <ENTER> button without entering any text to
keep the default name ([MEMORY1-16]).
■
[MEMORY LOAD]
You can access the details saved through [MEMORY
SAVE].
MEMORY LOAD
MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
MEMORY7
MEMORY8
MEMORY9
MEMORY10
MEMORY11
MEMORY12
MEMORY13
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
1/2
1) Press the ▲▼ buttons to select the
memory name to be called.
2) Press the <ENTER> button.
z
The video adjustments for the recalled memory
name are switched to.
Note
z
If there is no saved setting in the [MEMORY SAVE] or
[ALL DELETE] has been performed, the [MEMORY
LOAD] menu will not be selectable.
z
For details how to access with the remote control, see
“Loading a saved setting” in “Remote control operation”.
(
page 33)
■
[MEMORY DELETE]
You can delete memory entries.
MEMORY DELETE
MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
MEMORY7
MEMORY8
MEMORY9
MEMORY10
MEMORY11
MEMORY12
MEMORY13
1/2
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
1) Press the ▲▼ buttons and select the
memory name to be deleted.
2) Press the <ENTER> button.
z
Select [ALL DELETE] to delete all memory entries.
z
[MEMORY DELETE] conrmation message is
displayed.
MEMORY DELETE
DELETE THE MEMORY 1 DATA.
CANCELOK
3) Select [OK] with the ◄ ► buttons.
4) Press the <ENTER> button.
■
[MEMORY NAME CHANGE]
You can edit the memory name settings.
MEMORY NAME CHANGE
MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
MEMORY7
MEMORY8
MEMORY9
MEMORY10
MEMORY11
MEMORY12
MEMORY13
1/2
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
1) Press the ▲▼ buttons and select the
memory name to be changed.
2) Press the <ENTER> button.
z
The [MEMORY NAME INPUT] screen is displayed.
MEMORY NAME INPUT
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0
! " # $ % & '
＊ + - / = ? @ \ ^
_ ` |
~
( ) < > [ ] { } , . : ;
ALL DELETE
SPACE
OK CANCEL
3) Press the ▲▼◄► buttons to specify
the location of the required character to
enter and press the <ENTER> button.
z
You can enter up to 16 characters.
z
Select [ALL DELETE] and press the <ENTER>
button to erase all input text. If you press the
<DEFAULT> button on the remote control, you can
erase the character currently selected by the cursor
in the input box.
4) Press the ▲▼◄► buttons to select [OK].
5) Press the <ENTER> button.
Note
z
Press the <ENTER> button without entering any text to
keep the default name ([MEMORY1-16]).
SIGNAL MODE
(Available with signals from COMPUTER IN/
COMPONENT IN/HDMI IN only.)
The name of the signal being projected is displayed.
Note
z
See “List of compatible signals” for signal details.
(
page 100)