Filter
Top Products
8 203987 Rev A RCP2-1000 RM Remote Controller Operations Manual
1.2 Equipment Supplied
The following equipment is supplied with each unit:
• RCP2-1000 RM Redundant System Controller (1 RU high)
• (2) IEC Line Cord Sets
• Operations Manual (203987) RCP2-1000 RM System Controller
Paradise Data can provide the following optional equipment:
• Rack Slides
• Mating cable for Rack Mount SSPA and RCP2-1000, (Part Number
L201777).
1.3 Safety Considerations
Potential safety hazards exist unless proper precautions are observed when working
with this unit. To ensure safe operation, the user must follow the information, cautions
and warnings provided in this manual as well as the warning labels placed on the unit
itself.
1.3.1 High Voltage Hazards
High Voltage for the purpose of this section is any voltage in excess of 30 volts. Volt-
ages above this value can be hazardous and even lethal under certain circumstances.
Care should be taken when working with devices that operate at high voltage.
• All probes and tools that contact the equipment should be properly insulated
to prevent the operator from coming into contact with the voltage.
• The work area should be secure and free from non-essential items.
• Operators should never work alone on high voltage devices. There should
always be another person present in the same work area to assist in the
event of an emergency.
• Operators should be familiar with procedures to employ in the event of an
emergency, i.e. remove all power, CPR, etc.
An AC powered unit will have 115 VAC or 230 VAC entering through the AC power
connector. Caution is required when working near this connector, the AC circuit
breaker, or the internal power supply.