Filter
Top Products
26 Pelco Manual C650M (12/98)
7. To set the month, turn the SHUTTLE ring to the right. The month display will
flash. Turn the JOG dial to the right to set the MONTH.
8. To set the date, turn the SHUTTLE ring to the right. The date display will flash.
Turn the JOG dial to the right to set the DATE.
9. To set the year, turn the SHUTTLE ring to the right. The year display will flash.
Turn the JOG dial to the right to set the YEAR. The year digits can be set from
97 (for year 1997) to 27 (for 2027).
10. To set the time, turn the SHUTTLE ring to the right. The hour digits of the time
display will flash. Turn the JOG dial to the right to set the hour digits. Set the
minute digits in a similar fashion.
To set the time to the exact second, do the following. When you set the minute
digits, the digit on the right will flash and the seconds digits stay at 00. Turn the
SHUTTLE ring to the right when the time signal reaches 00 seconds of the
time you set. The time will begin counting from 00.
11. Turn the SHUTTLE ring to the right if you did not already do so in step 10.
Programming is now complete.
12. Press the DISPLAY button. The time display will appear.
NOTE:
The POWER button will not operate if any menu display is flashing.
<TIME DATE ADJUST >
DAYLIGHT SAVINGS OFF
MONTH 01
DATE 01
YEAR 97
TIME 00:00:00
<TIME DATE ADJUST >
DAYLIGHT SAVINGS OFF
MONTH 08
DATE 01
YEAR 97
TIME 00:00:00
<TIME DATE ADJUST >
DAYLIGHT SAVINGS OFF
MONTH 08
DATE 01
YEAR 97
TIME 00:00:00
<TIME DATE ADJUST >
DAYLIGHT SAVINGS OFF
MONTH 08
DATE 05
YEAR 97
TIME 00:00:00
<TIME DATE ADJUST >
DAYLIGHT SAVINGS OFF
MONTH 08
DATE 05
YEAR 99
TIME 00:00:00
<TIME DATE ADJUST >
DAYLIGHT SAVINGS OFF
MONTH 08
DATE 05
YEAR 97
TIME 00:00:00