Pelco TLR3096 VCR User Manual


 
36 Pelco Manual C672M (2/01)
UNLOADING
1. Press the EJECT button on the front of the VCR.
Even in standby mode the VCR will eject a video cassette. When you press EJECT,
the VCR automatically turns on, ejects the tape, and turns off.
You cannot eject a tape while recording without first pressing STOP, or while all the
VCR’s buttons are locked.
2. Remove the cassette.
PREVENTING ACCIDENTAL ERASURE
Video cassettes come with an erasure prevention tab. Removing it stops the tape’s
contents from being erased or recorded over. The VCR automatically ejects a cassette if
you try to record over it with the erasure prevention tab removed.
DAMAGED CASSETTE TAPE
We recommend you take any broken or torn tapes to a professional for repair. The
adhesives on many common types of tape could damage your VCR’s heads.
WHEN TO REPLACE A TAPE
We recommend you replace the tape cassette with a new one according to the mode in
which it is used. Refer to Table C.
Table C. Tape Replacement By Use
Number of Tape Uses
Recording Time Mode T-120 T-160
6H 100 50
L18H 60 30
L30H 25 10
48H 20 5
72H 15 3
92H 15 3
0H 1 1
00361
ERASURE
PREVENTION
TAB