Filter
Top Products
Pelco Manual C672M (2/01) 61
Example 2
Set the clocks to 12:27 on all the connected VCRs (when DELIMITER<SEND> and
DELIMITER<RECEIVE> on the RS-232C menu are set to CR).
Sending Commands Status or Error Code from
Meaning
from the PC, etc. the VCR to PC, etc.
ALL,SC12,27 CR Command for recording
VCR01, RC CR Command received (VCR01)
VCR01, EX CR Command carried out (VCR01)
••
••
••
VCR255, RC CR Command received (VCR255)
VCR255, EX CR Command carried out (VCR255)
CR indicates carriage return code (0DH).
The order and number of the status responses from the VCRs to the PC or other controller
may vary depending on the number of VCRs and ID number settings.