Filter
Top Products
25
Finalise set up of the external receiver
1 Tune your external receiver to the TV channel which transmits the
GUIDE Plus+
®
data.
O If this TV channel is available on the internal tuner of the
DVD-recorder, select the TV channel on the DVD-recorder
using CHANNEL q
P , CHANNEL r S .
2 If you did not find your country in this list, no TV channel will
provide the GUIDE Plus+
®
system information.
Refer to the internet page http://www.europe.guideplus.com to
find further information and tips.
Country/City
(Language)
TVchannel (aerial) TVchannel (SAT)
Deutschland Eurosport
Eurosport
Astra 19.2E
Österreich Eurosport
Eurosport
Astra 19.2E, Hotbird
13.0E
Schweiz (Deutsch) Eurosport
Eurosport
Astra 19.2E
United Kingdom ITV
Eurosport
Astra 28.2E
France Canal+
España Tele 5
Nederland
Music Factory (TMF) /
Eurosport
TMF Astra 19.2E
Eurosp. Hotbird 13.0E
- Eindhoven Music Factory (TMF)
Music Factory (TMF)
Astra 19.2E
- Rotterdam Music Factory (TMF)
Music Factory (TMF)
Astra 19.2E
- Amsterdam Music Factory (TMF)
Music Factory (TMF)
Astra 19.2E
België (Flemish) Music Factory (TMF)
Music Factory (TMF)
Astra 19.2E
3 If the TV channel is only available on the external receiver, select
the programme number of the socket to which the external
receiver is connected.
O If the external receiver is only connected to the aerial socket,
you must select the programme number on the DVD
recorder under which the external receiver is stored.
4 If you can switch between 'TV' and 'Radio' on the external
receiver, select 'TV'.
5 Leave the DVD-recorder and the satellite receiver switched on for
about 24 hours to load the GUIDE Plus+
®
data.
6 If GUIDE Plus+
®
data were loaded, switch the DVD-Recorder off
with the STANDBY m
2 button for approx.10 minutes. During
this time, the data will be stored in a memory to prevent them
from being erased in case of malfunction (power failure).
7 Press GUIDE/TV
J and select the menubar using A I .
8 Select the 'Editor' screen using C
M and confirm using B O .
Home
EditordisplaysyourTVchannelsettings.Youmay
switchchannelOnorOff(grey),selecttheirSource
andtheirprogrammenumber.PressBtouse.Press
DforInfo.PressCforSetup.
Search Schedule Info Editor
Name On/Off Source ProgrammeN.
BBC1 On TV P001
BBC2 On TV P002
ITV On TV P003
CH4 On TV P004
9 Check the TV channels and the allocation to the programme
numbers. Switch between the two tiles using C
M , D K .
Select the TV channels using B
O , A I , CHANNEL r S ,
CHANNEL q
P (for page forward/backward)
O left tile
Switch the TV channels you want to use to 'On' using the red
function button
D .
Don't switch off the GUIDE Plus+
®
data channel!
O right tile
For TV channels on the external receiver, press the red
function button
D to switch to 'External receiver 1'
The press the green function button
E and enter the
programm number for this channel using the 0..9
X buttons
(this is the same programme number as you would enter on
the external receiver for this TV channel).
Check that the GUIDE Plus+
®
data channel is allocated
to the right programme number!
0 End using GUIDE/TV
J .
Your external receiver is now installed in the GUIDE Plus+
®
system.
Initial Installation of the GUIDE Plus+ system