Filter
Top Products
87
'Safety Slot'
Here you can enter a time (one to five minutes) when a programmed
recording (Timer) should start earlier and end later. This could be
necessary if the information from the GUIDE Plus+
®
system about the
start and stop time always differ from the actual start and stop time
(e.g. always 2 minutes).
You can use this function also for a manual programmed recording.
Please observe:
The DVD recorder switches on e.g. 5 minutes before the start time
(recording in the Time Shift Buffer). As soon as it reaches the start
time, the recording (red marker on the time bar) advances forward 5
minutes. As a result, the 'lead time' will not become effective until the
start time is reached.
'Set up'
SYSTEMMENU
System
Setup
Autodelete
Jumpforward
Jumpback
Installation
FlushBuffer
'System'
In this menu, you can select one of the following features:
'Auto delete'
If there is no space for new recordings on the HDD, you can
determine here whether recordings will be automatically deleted or
not. You can see the titles and the sequence according to which they
will be deleted in the 'Delete Order' setting in the media browser. For
more information, read the chapter 'The Media Browser'.
O 'On':
Recordings will be automatically deleted in the following
order:
1) Titles that have already been viewed. Symbol '
E'.
2) Titles that were not protected. No symbol '
F' available.
O 'Off':
No recordings will be automatically deleted.
If the HDD is nearly full and this function is switched off, it is
not possible to programm a recording (Timer).
'Jump forward'
Set the time you want to jump forward when you press JUMP
FWD
W in the Time Shift Buffer. Confirm the new time using
OK
L .
'Jump back'
Set the time you want to jump backward when you press JUMP
BACK
T in the Time Shift Buffer. Confirm the new time using
OK
L .
Use the setting 5 minutes for Jump forwardand 1 minute for
'Jump back', to make it easy to skip unwanted scenes.
'Installation'
Please observe that for selection of function in this menu the Time Shift
Buffer will be flushed. If the 'Time Shift Buffer ' contains important
recordings, save them with the REC/OTR n
1 button first. Read
additional information about the 'Time Shift Buffer' in the chapter 'The
Time Shift Buffer'.
O 'Autoinstall':
Automatic channel search.
O 'Follow TV':
Sorting TV channels automatically.
O 'Manual search':
Manual TV channel search.
O 'Sort TV channels':
Sorting TV channels manually.
O 'Time/Date':
Setting/Correcting the time and date.
For more information, please read chapter 'Additional installation
features'.
'Flush Buffer'
Using this function, you can store recordings on the HDD that were
marked for recording in the Time Shift Buffer. Recordings that were
not marked will be deleted.
O 'Yes':
Recordings will be stored.
O 'No':
This interrupts the process.
User preferences / settings I