Filter
Top Products
39
Switch over to the actual TV channel during
playback
As soon as you turn on the DVD recorder, the currently selected TV
channel on the DVD-Recorder is recorded in a temporary storage
(Time Shift Buffer).
Recordings in the Time Shift Buffer will be automatically deleted e.g.
after 3 hours if the period of the Time Shift Buffer is set to 3 hours
(factory setting).
You can play back a disc, while the current TV show is still being
recorded.
1 To interrupt playback from a disc, press TUNER 0
P You will see the TV-show from the selected TV channel on
the DVD-recorder
O To continue playback, from the disc press DISC MENU B .
Inserting a disc
1 Press the OPEN/CLOSE J 3 button on the front.
OPENING P01
P The disc tray will open. While the disc tray is opening, the
display shows 'OPENING' and then 'TRAY OPEN' when the tray
is fully open.
2 Carefully place the disc in the tray with the label facing up and
press PLAY G
R or OPEN/CLOSE J 3 .
P 'CLOSING' and then 'READING' will appear in the display. The
information on the disc will be read.
How do I insert a double-sided DVD?
Double-sided discs do not have labelling over the whole surface. The
labelling for each side is in the centre of the disc. To play a side its label
must be facing up.
Opening/closing the tray using the remote control
You can open and close the disc tray using the remote control.
Press and hold the STOP h
N button on the remote control until
the dialog box shows 'OPENING'or'CLOSING'.
Playing a DVD video disc
A menu may appear when a DVD is played back. If the titles and
chapters are numbered, press a number button on the remote control.
O You can also use the D K , C M , A I , B O buttons
or number buttons 0..9 to select a menu item and confirm
with OK
L .
O You can also access the menu using DISC MENU B on the
remote control.
1 If playback does not start automatically, press PLAY G R .
P title/chapter number, elapsed time will appear on the display.
C01 2:04
2 To stop playback, press STOP h N on the remote control or
h
A on the DVD recorder.
3 To remove the disc, press OPEN/CLOSE J
3 on the front of
the DVD recorder.
Regional code
DVDs must be marked 'ALL' for all regions or '2' for
region 2 to work in this device. If the DVD is marked
with a different region, it cannot be played in this DVD
recorder.
The number within the globe represents the region.
Regional code 2 includes:
Europe, Japan, South Africa, Middle East (incl. Egypt).
Playback from an optical disc