Filter
Top Products
User Guide
10
Placing the Batteries
When you use Pronto for the first time, you will have to place 4 AAA batteries. You
can use rechargeable or non-rechargeable AAA batteries.
1Press the latch on the battery cover with your thumb and then slide the
cover forward firmly.
2 Lift up the battery cover.
Before You Start
3 Place the batteries in the battery
compartment.
4 Slide the battery cover back on.
After a few seconds, the Pronto NG starts up automatically and an
introduction screen appears. The Pronto NG beeps twice to indicate
that it has finished starting up.
Notes When the batteries are running low, the Low Battery icon appears over the battery
icon in the upper left corner of the screen.
Pronto NG retains all its settings when the batteries have run out. You will only
have to set the contrast and the time. See ‘Setting the Contrast’ on page 11 and
‘Changing the Time’ on page 12 for more information.
You can also use a docking station and a battery pack to recharge your Pronto NG.
The docking station and the battery pack are optional.
Pronto TSU3000v3 US 18-02-2004 16:02 Pagina 10