Filter
Top Products
User Guide
21
Customizing Pronto NG
4 In the Device Overview, tap the Device for which you want to define
the brand.
A message screen appears.
5Tap .
The ‘Brands’ screen appears.
Searching the brand
1Tap in the ‘Brands’ screen.
The ‘Searching the Brand’ screen appears.
2Tap and point Pronto NG at the device.
The ‘Searching’ screen appears. Pronto NG searches through the list of brands,
by sending out an IR code for each brand.
3When the device for which you are defining the brand, turns off,
tap in the ‘Searching’ screen.
The ‘Installing the Brand’ screen appears.
4To install the brand and code set, follow the instructions described in
‘Installing the brand’ on page 19.
Learning Commands
If an IR code is not in the database, you can program Pronto NG commands by
transmitting IR signals from your existing remote control to Pronto NG’s learning
eye.
The Learn Tool allows you to learn a button
or a device action. A device action is an
action that is executed automatically when
you select a device. E.g. when you select TV,
your Pronto NG can learn to switch on the TV
at the same time. You can also use the Learn
Tool to relearn commands that do not work
properly.
Note Changing the Brand in the Brand Tool
will not have an impact on the learned
codes.
Learning
eye
4 - 8 inches
10 - 20 cm
Pronto TSU3000v3 US 18-02-2004 16:02 Pagina 21