Filter
Top Products
User Guide
47
Using the Power Features
Selecting RF to Operate your Devices
1Tap and hold the Pronto NG icon in the upper left corner of the
touch screen for 3 seconds. The Tools Menu appears.
2Tap in the Tools Menu.
The ‘RF IR Tool’ screen appears.
3Tap .
The Device Overview appears.
4Tap the Device for which you want to select RF.
The ‘Select IR or RF’ screen appears. By default IR is selected in the Sending
Signals list.
The Define RF button is disabled.
5 Choose RF in the Sending Signals list.
The Define RF button is enabled.
6Tap .
The ‘RF Settings’ screen appears.
7 Select the RF Channel in the RF Channel ID list you use for the RF
Extender.
The RF Channel on the RFX6000 has to be the same as the RF Channel on
Pronto NG.
8 Select the Extender ID in the Extender ID list you use for the RF
Extender.
The Extender ID on the RFX6000 has to be the same as the Extender ID on
Pronto NG.
Note You can use several RF Extenders with your Pronto NG. For each RF Extender
you use for your devices, you need to set the RF Channel and the Extender ID.
The RF Channel is identical for all RF Extenders. The Extender ID on the
RFX6000 is unique for each RF Extender.
9Tap in the ‘RF Settings’ screen.
The RF settings are saved.
Pronto NG will send out RF signals for the selected device.
Note Try to keep Pronto NG and the RF Extender away from metal objects, as this will
have a negative impact on the range.
Pronto TSU3000v3 US 18-02-2004 16:02 Pagina 47