Filter
Top Products
97654438 E
Page 23
4) Cut the banding straps that secure the unit to the pallet and removes plastic corners.
EP005016
Removing Banding Straps from LF 6602
5) Unlock and unlatch the LF 6602's rear door (see next figure).
6) With the LF 6602's rear door open, unfasten and remove the two bolts from the front of the
frame using a 1/2 in. socket wrench. Ensure that you pull the bolts completely out of the
frame.
7) Loosen, but do not remove, the two bolts on the back of the frame. Part of the wood frame
will then angle out, thereby lowering the LF 6602 onto its casters.
8) With the #2 cross recess screwdriver, remove the four screws from each bracket on the
front of the frame, and then remove the brackets and the wood support.
BANDING STRAP
AND PLASTIC
CORNER