Filter
Top Products
PLASMON LASER MAGNETIC STORAGE - LF 6602 USER MANUAL
Page 46
MODES OF OPERATION
The LF 6600 has three modes of operation that are selectable from the DOC:
• Operating Mode
• Configuration Mode
• Test Mode
In Operating mode the host system can read and write data, and select and load media cartridges. In
Configuration mode an operator can view a menu of parameters and select options for each parameter.
Test mode invokes drive diagnostics to verify proper drive operation.
OPERATING MODE
The LF 6600 enters the Operating mode after being powered on and displays the "# Ready" message on
the DOC. The DOC will display the appropriate messages listed in the table below during normal
operation.
To enter Operating mode if the drive is in Test mode, wait until the tests are completed and then press the
LOAD/MENU switch. To enter Operating mode if the drive is in Configuration mode, press the LOAD/
MENU and the TEST/SELECT switches simultaneously.
NOTE
The pound symbol #, shown in the table below, designates the slot
number.