Filter
Top Products
Installation
14 CinemaWall Installation/Operation Manual
PRE
L
IMINAR
Y
• As it lies flat with the screen face
down. Place the protective sheet,
which was wrapped around the
plasma monitor when it was
packaged, between the screen and
your work surface to avoid
scratching or otherwise damaging
the screen surface.
Ambient Light In general, minimize or eliminate light sources directed at the display. Contrast ratio in your
images will be noticeably reduced if light directly strikes the display, such as when a shaft
of light from a window or floodlight falls on the image. Images may then appear washed
out and less vibrant.
Ventilation If you are mounting the CinemaWall in an enclosure, leave sufficient space on all sides
between it and surrounding objects, as shown in
Figure 3-1. This allows heat to disperse,
maintaining the proper operating temperature.
Figure 3-1. Ventilation Requirements for Enclosure Mounting
➤
➤
50
mm
(2")
50
mm
(2") 50
mm
(2")
Wall
Wall
50
mm
(2")
50
mm
(2")