Filter
Top Products
Operation
CinemaWall Installation/Operation Manual 47
PRE
L
IMINAR
Y
Weekly Command Timer: You can program the CinemaWall to perform a series of
actions at specific times of the day and days of the week. To do this, you create
command sequences or “programs” consisting of a series of up to 64 individual
commands. You can create up to seven such programs and specify when they are
executed.
For example, you can store the following command sequence as a program:
1. 8:00 - Power On
2. 8:01 - Select INPUT1A
3. 8:01 - Set Volume to 30
4. 8:15 - Enable Multi-PIP
5. 8:20 - Activate Screen Saver
6. 8:30 - Deactivate Screen Saver
7. 9:00 - Power Off
To configure the Weekly Command Timer, select it in the OPTIONS menu and press the
ACTION ( ) button.
• Function: This is the “master switch” for the Weekly Command Timer feature. Set it to
On to use this method to automate CinemaWall operation.
• Monday, Tuesday ... Sunday: For each day of the week, select a program
(Program1
... Program7) that you want to use that day to control the CinemaWall. Or,
select “---” for manual operation.
If you enable the Weekly Command Timer, you cannot use the SET
UP TIMER, nor can you use the INTERVAL or TIME OF DAY screen
saver modes.
Note