Filter
Top Products
CinemaWall Installation/Operation Manual A-1
PRE
L
IMINAR
Y
Table A-1 lists the CinemaWall factory-default image settings. All of these settings are in
the PICTURE menu except for 1:1 PIXEL MODE, which is in the POS./SIZE menu.
Appendix A. Default Settings
Table A-1. Runco Factory Default Settings for CinemaWall
Menu Setting
Models XP-50 and XP-OPAL50 Model XP-65 and XP-OPAL65
PICTURE MENU Setting
ISF Night STANDARD ISF DAY MONITOR ISF Night STANDARD ISF DAY MONITOR
PICTURE 30 30 30 – 30 30 30 –
BRIGHTNESS -5 -2 -2 0 -6 -4 -4 0
COLOR -2 -2 -2 0 -2 -2 -2 0
TINT 0 0 0 0 0 0 0 0
SHARPNESS 3 3 3 0 5 5 5 0
COLOR TEMP NORMAL NORMAL NORMAL WARM NORMAL NORMAL NORMAL WARM
COLOR
MANAGEMENT
OFF OFF OFF OFF OFF OFF OFF OFF
ADVANCED SETTINGS ON ON ON OFF ON ON ON OFF
BLACK EXTENSION 0 0 0 – 0 0 0 –
INPUT LEVEL 0 0 0 – 0 0 0 –
GAMMA 2.2 S-Curve S-Curve – 2.2 S-Curve S-Curve –
AGC OFF OFF OFF – OFF OFF OFF –
R GAIN 3 3 3 – -2 -2 -2 –
G GAIN 0 0 0 – 0 0 0 –
B GAIN -18 -18 -18 – -14 -14 -14 –
R OFFSET -11 -11 -11 – -1 -1 -1 –
G OFFSET -7 -7 -7 – -2 -2 -2 –
B OFFSET 0 0 0 – 0 0 0 –
1:1 Pixel Mode
(
POS./SIZE menu)
On On On Off On On On Off