Filter
Top Products
32
" Some CAM in the market with older firmware versions are not fully interoperable with
this device that is compliant to v1.3 specification.
" It is a problem of legacy CAM, not this CI Plus compliant device. In this case , this
problem can be resolved by applying a firmware upgrade to the CAM.
" Please contact your network operator or CAM operator for it.
" Check whether the firmware of CAM is upgraded for compatibility with CI+ 1.3 Version.
Network
When you connect this product to a network, you can use network based
applications and functions, and upgrade the product's software through the
network connection. To use network services, you must connect the product to the
network.
Network Status
Lets you check the current network and Internet status.
Network Settings
Except for BD-F6 series
Before you begin, contact your ISP to find out if your IP address is static or
dynamic. If it is dynamic, and you have a wired or wireless network, we recommend
using the Automatic configuration procedures described below.
If you are connecting to a wired network, connect the product to your router using
a LAN cable before you start the configuration procedure. If you are connecting to
a wireless network, disconnect any wired network connection before you begin.