Filter
Top Products
2
Live screen Mode
4-2
Definition of Live Screen Icon
The Live screen icons of SHR-4081N/P display the current setup and function status of each screen.
English
1
System Motion
4-1
SHR-4081N/P USER’S MANUAL
● Turn the power on and the following LOGO screen pops up.
● After the LOGO screen appears, the button in front of SHR-4081N/P blinks 6 times
to initialize the system for operation.
● When the initialization is complete, the live video appears along with a beep
sound.
● It requires 30 to 40 seconds until the Live screen appears.
Note
Note
A new HDD may require more time for the initialization until the Live screen
appears due to the initialization period of the new HDD.
If the Live screen does not appear at all or the button in front of SHR-4081N/P
repeats blinking, please check the connection across the product body. If you find
any error, please ask the shop where you bought the product.
Note
Note
If you see no more Live screen, you shall check if video data comes out in Composite
mode or VGA mode.
If you whish to change the video output mode, you shall hold on to the MODE
button in front of SHR-4081N/P and keep pressing the 0 button for 5 seconds. Press
‘0’ button for 5 seconds with pressing the front mode button to change video output
mode. After 3 times flickering of PTZ LED on the front left, it reboots.
● The Live screen does not affect the earlier MENU setup. If you reboot the system
after power-off during recording, the Live screen will appear, accompanying
recording.
PTZ
N
CAM_01
CAM_01
V.Loss
: Recording Icon
Each icon represents Normal / Panic / Event(Alarm+Motion) /
Schedule Recording.
: Recording Video Size Icon
Each icon represents the recording size of Large/ Normal/ CIF
Large : Full D1(NTSC : 720 x 480 / PAL : 720 x 576)
Normal : Half D1(NTSC : 720 x 240 / PAL : 720 x 288)
CIF : CIF(NTSC : 352 x 240 / PAL : 352 x 288)
: PTZ Icon
This icon appears when you set up PTZ device with the PTZ icon and
turns yellow when you execute PTZ.
: Audio Icon
This icon represents Audio On/Off status and turns yellow for On.
It does not appear for Video or Audio Disable.
: Sensor In Event Icon
This icon appears in the channel synchronized with the external sensor signal
input with Sensor On.
: Motion Event Icon
This icon appears in the Motion Event channel with Motion Detection On.
: Zoom Icon
This icon appears with Zoom On or Zoom In and disappears when you cancel
Zoom On.
: Freeze Icon
This icon appears in the Freeze mode and disappears when you cancel
Freeze.
: Insufficient Disk Space Icon in CH
More than one channel has insufficient recording space.
: Insufficient Disk Space Icon in all CHs
All the channels have insufficient recording space.
P ES
PTZ
English