Filter
Top Products
English English
10-58
SHR-4081N/P USER’S MANUAL
10-57
● Smart Viewer Version
- Smart Viewer Version and system requirements will be displayed.
● DVR Version
- DVR Version not only displays the connected DVR(SHR-4081N/P) name if any
DVR(SHR-4081N/P) is being connected with Smart Viewer or the name of
DVR(SHR-4081N/P) composing a site if any DVR(SHR-4081N/P) is being
connected with the site but also displays DVR(SHR-4081N/P) S/W version.
- Smart Viewer will be expressed in gray when disconnected from
DVR(SHR-4081N/P) and Status will be marked as “Not Connected”.
- Each DVR Version has a check box, which is used for S/W Upgrade.
● DVR(SHR-4081N/P) S/W Upgrade
- Smart Viewer upgrades on-line DVR(SHR-4081N/P) S/W remotely.
! Check a DVR(SHR-4081N/P) to be upgreaded among DVRs(SHR-4081N/P)
on line.
@ Click the following button to open the “SHR-4081N/P Firmware” file in tgz
format.
# Press the [Upgrade] button to transmit a file to the selected DVR
(SHR-4081N/P) and start upgrade of DVR(SHR-4081N/P) S/W.
$ The progress of file transmission and upgrade will be displayed at the bottom.
Note
Note
The new Firmware necessary for DVR(SHR-4081N/P) S/W upgrade shall be downloaded from
CCTV Part in Products Section at http://www.samsung.com
Caution
Caution
Be sure to suspend all the DVR system functions in action such as recording, MENU,
backup, and play before you upgrade DVR(SHR-4081N/P) S/W.
Never try to turn the DVR(SHR-4081N/P) power off during such S/W upgrade.
S/W upgrade requires about 5 minutes.
If S/W upgrade is suspended accidentally, the previous S/W will be left intact.
SHR-4081N/P
SHR-4081N/P
SHR-4081N/P Smart Viewer
SHR-4081N/P