Filter
Top Products
English
10-10
● Monitoring Mode Connection Screen
● Mode Conversion Button
- This button changes Monitoring Mode or Search Mode.
SHR-4081N/P USER’S MANUAL
7
Monitoring Mode
10-9
● DVR(SHR-4081N/P)/SITE Connection
- Select the name of DVR(SHR-4081N/P) or site for connection and click the
connection button.
English
Connection Failure Cases
1. Password Certification Failure
- In case of discord between the Network password set to SHR-4081N/P and the
connection password set to Smart Viewer, a window pops up to induce retry of
password input.
2. Admin User Connection Failure
- Where SHR-4081N/P that you wish to connect to has been already occupied by
other user in an Admin. Capacity, you are authorized with access to
SHR-4081N/P concerned in a User capacity.
Note
Note
You can determine the name, IP, and password of DVR(SHR-4081N/P) for
connection in Setup Mode. Also, setup of a site which permits simultaneous
connection to multi-DVRs(SHR-4081N/P) is available in Setup Mode.
When you connect to the SITE, you may connect to a maximum number of 16 DVRs
(SHR-4081N/P) simultaneously.
Note
Note
No more than 3 users, one Admin. authorized user and 2 User authorized users are allowed to
access SHR-4081N/P simultaneously. One SHR-4081N/P allows as many as 3 users, 1 Admin
and 2 Users for simultaneous connection(or as many as 6 users including 5 Users for
Multicast).
Caution
Caution
Only 3 users can be connected to the SHR-4081N/P( 6 Users in Multicast).
Caution
Caution
If you alter “Resolution” or “Color Quality” from the setup tab of [Display
Registration Information] while Smart Viewer is running, Smart Viewer will fall into
an unexpected condition.
You shall terminate Smart Viewer first to recover the condition.