Filter
Top Products
English English
8
Network
5-28
● Connection Mode
Designates the kind of the network connected to the main body of SHR-4081N/P.
Static IP : When the main body is connected to the network with Static IP.
Dynamic IP : When the main body is connected to the network with Dynamic IP
supplied by DHCP.
ADSL(PPPoE) : When the main body is connected to the ADSL network with PPPoE.
● Bandwidth
Designate the speed of the network to which the SHR-4081N/P main body is connected.
Unlimited/2Mbps/1Mbps/600Kbps/300Kbps
● Admin Password
The password for the connection between Smart Viewer and the set with the authority
of Admin. The password can be as long as 8 digits.
Press "Enter" and the left number keys from 0 to 9 for setup.
● User Password
The password for Smart Viewer’s access to the set with the authority of general user.
● IP
Set up the IP address to connect the SHR-4081N/P main body to the network.
In case of a fixed IP, you must input IP yourself.
In case of a flexible IP or ADSL(PPPoE), the IP allocated from the DHCP server or
ADSL company. If you fail to connect DHCP or ADSL, 000.000.000.000 is displayed.
Then, press "OK" to receive IP. If you repeatedly fail to connect DHCP or ADSL, turn the
SHR-4081N/P main body power off and turn it on again before you retry connecting.
SHR-4081N/P USER’S MANUAL
5-27
Caution
Caution
If the main frame is connected to a network that uses a high speed LAN, set the
bandwidth to 1Mbps or 2Mbps. If the main frame is connected to a network that
supports ADSL or lower bandwidth, set the bandwidth below 600Mbps, and set the
Record Mode below CIF (STANDARD).
If you set a higher bandwidth or Record Mode in a network that only supports lower
bandwidth, the network will be overloaded and the connection to the SmartViewer
or video monitoring may not operate properly.
USB Device Backup Settings
Note
Note
If the Connection Mode is set to ADSL, the bandwidth of IP settings page will be
locked to 300Kbps, and the protocol type of the transfer protocol settings page will
be locked to TCP.
IP Settings
Caution
Caution
[In the Backup process]
Press "Cancel" to return to the upper menu but the process continues nevertheless.
Press "Stop" to suspend backup
Backup may retard the normal set speed.
● In the presence of the device, the free space and backup device will be displayed.
● Select the backup date and time and the camera number, then press "Start".
● Whenever you change the start date/time, the end date/time, the free space is updated
and displayed.
● In case that two devices are connected, select the backup device by
clicking the USB CD/DVD box at the left bottom.
● In the absence of the backup device, a warning message appears.
Select and connect the backup device in Menu 5-8, HDD Setup before the backup process.
● Press "Start" to suspend backup.
● Press "Cancel" during backup to return to the upper menu but the process
continues nevertheless.