Filter
Top Products
English English
10-44
SHR-4081N/P USER’S MANUAL
10-43
● Callback
- Sets up the Callback functions of SHR- 4081N/P.
- Sets up the IP address and port to which SmartViewer was installed to deliver
the Callback message in the event of Alarm, Motion Detection, or Video Loss.
Sets up the value for retrial in the event of message delivery failure.
● Translation Protocol
- Changes the Transmission Protocol setting values. The protocol supports TCP/IP
and UDP(Unicast, Multicast). Control Port(TCP/IP) and Port(UDP) to change the
connection port. Multicast IP or TTL will be used for UDP(Multicast).
Note
Note
- SHR-4081N/P uses 4 PORTs for TCP connection.
- A PORT number is flexible and 4 numbers in a row will be changed in all.
(554,555,556,557 ➝ 558,559,560,561)
- You shall allocate the above ports for SHR-4081N/P if you want to compose a
network by IP Router.
Viewer Setup
- Click the [Viewer Setup] for Viewer Setup.
- Viewer Setup sets up various kinds of items related to Smart Viewer motions.
- Viewer Setup is consisted of 7 items : Video Recording, File Converting,
Sequence Time, OSD Display, Auto Connection, Callback Connection, and
Language.
! This is used for the setup of information necessary for saving the video data in
display in .dvr file format while you are connected to SHR-4081N/P.
@ This is used for the setup of information necessary for converting the file saved
in your PC in .dvr file format into JPEG.
# This is used for the setup of information necessary for Screen change Mode.
$ This is used for the setup of information on OSD display for Smart Viewer.
% This determines whether Smart Viewer shall be automatically connected to
DVR(SHR-4081N/P) or Site when it begins running.
^ This is a menu item that is designed to set the alarming time when it receives
an event message such as an alarm, motion and/or Video loss.
& Selects the port to allow the connection of Callback.
*
This item is for the language setup.
*
*
1
2
3
5
7
4
6
8