Sharp LD-26SH3U Flat Panel Television User Manual


 
E13
EnglishFrançaisEspañolItalianoEspañolEnglish
Product description
Angle adjustment
Adjust to an easy to view angle.
CAUTION!
- Be sure to hold both sides of the TV when
adjusting the viewing angle. The LCD panel
used in this TV is made of glass. Pressure from
hands on the LCD panel could cause damage.
- Be careful not to allow your fingers to be
pinched.
- Do not put your hand or objects near the stand.
When changing the viewing angle horizontally,
the stand moves and may hit the objects or
cause injury to your hand or fingertips.
approx. 5°
approx. 5°
approx.
15°
approx. 15°
Cable clamp
Use the supplied cable clamps to secure the
cables connected to the terminals.
CAUTION!
- When adjusting the viewing angle, cables may
be pulled. Therefore, ensure that the cables
have sufficient slack.
Using headphones
(commercially available)
You can connect headphones with a mini stereo
jack (φ 3.5 mm) to the TV.
Notes:
- When headphones are connected:
- No sound can be heard from the TV speakers.
In addition, when "Output Select" is set to
"Variable1" or "Variable2" in the Option menu,
no sound via the audio output terminals can
be heard either.
- The Virtual Dolby Surround function (see page
E31) cannot be used.
- The Audio menu (see pages E43 and E50)
cannot be adjusted.
Headphone
terminal
Headphones
01_LD-26SH3U_gb_01.P65 5/23/2005, 1:44 PM13