Filter
Top Products
E45
EnglishDeutschFrançaisItalianoEspañolEnglish
Option menu (See page E42 for information on using the menus.)
Item
Quick Shoot
Output Select
DVI Select
HDMI Setup
(AV4 mode only)
Description
Reduces the visual lag inherent in fast-motion scenes.
Selects how to adjust the sound via the audio output terminals.
- Fixed
.....................
Set "Fixed" when connecting to a VCR for recording, etc.
The volume via the audio output terminals is fixed.
(TV speaker volume can be adjusted.)
Image and sound are simultaneously output via the
output terminals. (Image and sound are output via the
output terminals a little earlier than when image is
displayed on the TV and sound is output from the TV
speakers.)
- Variable1
..............
Set to enjoy the sound from both the TV speakers and
external speakers while watching the image on the TV.
The volume can be adjusted. (See page E30.)
Image is displayed on the TV at the same time as when
sound is output via the output terminals. (Sound is
output via the output terminals a little later than when
image is output via the output terminal.)
- Variable2
..............
Set to enjoy only the sound from the external speakers
while watching the image on the TV.
The volume of the external speakers can be adjusted.
(See page E30.)
However, no sound can be heard from the TV speakers
with this setting. (Sound via the headphone terminal
can be output.)
Image is displayed on the TV at the same time as when
sound is output via the output terminals. (Sound is
output via the output terminals a little later than when
image is output via the output terminal.)
Set depending on equipment connected to the DVI input terminal.
-AV
.........................
AV equipment (AV5 mode is available.)
-PC
........................
Computer (PC DIGITAL mode is available.)
For information on connecting to AV equipment or a computer, see page E24
(AV equipment) or page E26 (computer).
Sets the parameters related with HDMI setting.
- Signal Type
..........
Selects the signal type from the HDMI input terminal.
Unless the image quality looks obviously poor, select
"Auto".
- Color Matrix
.........
Selects the internal color space conversion method when
an RGB signal is input. Normally, select "Auto".
- Dynamic Range
...
Selects the signal amplitude range. Normally, select
"Standard".
- Auto View
.............
Sets whether or not to use "View Mode" based on signal
recognition, including an HDMI signal.
Using the menus in TV/AV mode
02_LD-26SH3U_gb_02.P65 5/23/2005, 1:44 PM45