Filter
Top Products
E28
Basic operations
Turning power on/off
POWERVOLCHENTERMENUINPUT
POWER
DISPLAY INPUT
FLASH
BACK
Turning power on
When the POWER LED is off:
1.Press the POWER button on the TV.
2.Turn on power to the connected equipment.
After a while the POWER LED will light green,
and then the display mode will be displayed for
several seconds.
When the POWER LED is lit red (standby):
1.Press the POWER button on the remote control.
2.Turn on power to the connected equipment.
The POWER LED will light green, and then the
display mode will be displayed for several
seconds.
Turning off power
1.Turn off power to the connected equipment.
2.Press the POWER button on the remote control.
The POWER LED will light red (standby).
3.Press the POWER button on the TV.
The POWER LED will go out.
Notes:
- Always wait at least 5 seconds between
switching power off/on. Rapid switching may
damage the TV or cause it to malfunction.
- After switching power on, it may take a little
while before the screen displays an image.
- Do not turn off the power immediately after
changing various settings on the screen. The
changed values may not have been saved in the
memory yet.
01_LD-26SH3U_gb_01.P65 5/23/2005, 1:44 PM28