Sharp LD-26SH3U Flat Panel Television User Manual


 
E67
EnglishDeutschFrançaisItalianoEspañolEnglish
Dimensions (Units: mm (inch))
280 (11
1
/32)
110 (4
11
/32)
500 (19
11
/16)
559 (22
1
/64)
398 (15
43
/64)
667 (26
17
/64)
Note:
- As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may be some deviations from these
values in individual units.
Relevant signal timings (PC mode)
640
X
480
800
X
600
848
X
480
1024
X
768
1280
X
768
1360
X
768
1280
X
720
720
X
400
640
X
480
832
X
624
1024
X
768
31.5kHz
37.9kHz
37.5kHz
35.1kHz
37.9kHz
48.1kHz
46.9kHz
31.0kHz
48.4kHz
56.5kHz
60.0kHz
47.8kHz
60.3kHz
47.7kHz
44.7kHz
31.5kHz
35.0kHz
49.7kHz
60.2kHz
25.175MHz
31.5MHz
31.5MHz
36.0MHz
40.0MHz
50.0MHz
49.5MHz
33.75MHz
65.0MHz
75.0MHz
78.75MHz
79.5MHz
102.25MHz
85.5MHz
74.4MHz
28.3MHz
30.2MHz
57.3MHz
80.0MHz
60Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
60Hz
70Hz
75Hz
60Hz
75Hz
60Hz
60Hz
70Hz
66.7Hz
74.6Hz
75Hz
Screen resolution Hsync Vsync
Dot
Analog Digital
frequency
VESA
Wide
US text
Power
Macintosh
series
: Available
- Recommended resolution is 1360 x 768, 1280 x 768, or 1024 x 768.
- All are compliant only with non-interlaced.
- Depending on the type of computer to be connected, the display may not work correctly even when the
above relevant signals are input.
- Frequencies for Power Macintosh are reference values. To connect, another adapter (commercially
available) may be required.
- For digital connection, the TV can be connected to a computer with a DVI-compatible output terminal
(DVI-D 24 pin or DVI-I 29 pin). (Depending on the type of computer to be connected, the display may
not work correctly.)
- If the TV is receiving timing signals that are not compatible, "Out of Timing" will appear. Follow your
computer's operation manual to set the timing so that it is compatible with the TV.
- If the TV is not receiving any signal (sync signal), "No Signal" will appear.
Specifications
- Power cord: approx. 1.8 m (5' 10")
- PC analog signal cable: approx. 1.8 m (5' 10")
- PC audio cable: approx. 1.8 m (5' 10")
- Digital signal cable, NL-C04J (purchased
separately): approx. 2.0 m (6' 6")
02_LD-26SH3U_gb_02.P65 5/23/2005, 1:45 PM67