Filter
Top Products
E32
Setting TV channels
The following table shows the channels this TV
can receive.
VHF Channels 2 through 13
UHF Channels 14 through 69
Cable
Channel 1 (HRC and IRC mode only)
Channels 2 through 125 (STD, HRC, and IRC)
(You must subscribe to a cable TV service to
receive cable channels.)
When you first receive this TV, it has no memory of
any channels. To receive channels, perform the EZ
Setup (see page E20) after the first power-on, or
use "CH Setup" in the Setup menu.
Channel setting methods
There are two ways to set channels.
Automatically setting channels you can receive
(CH Search)
The TV will automatically set the channels it can
receive in your area.
Setting channels one at a time
(CH Memory)
This method is for manually setting the channels
you want one by one. Use this method if you want
to add other channels after using "CH Search".
Selecting broadcast (Air) or cable TV
(Cable) for channel setting
It is necessary to set the receiving mode to "Air" or
"Cable" channels to receive locally broadcast TV
programs.
TV AV
MENU PC
VOLCH
ENTER
1.Press the TV button to select TV mode.
A channel number will appear in the upper-right
corner of the screen.
2.Press the MENU button to display the MENU
screen.
3.Press the buttons to select "Setup".
Picture Audio Setup Option
CH Setup
V-Chip
Position
Language [English]
MENU [Setup]
4.Press the buttons to select "CH Setup", and
press the ENTER button.
"CH Setup" screen will be displayed.
MENU [Setup
...
CH Setup]
Air/Cable
CH Search
CH Memory
Selecting Air/Cable channels
Air
Cable(STD)
Cable(HRC)
Cable(IRC)
5.Press the buttons to select "Air/Cable", and
press the ENTER button.
6.Press the buttons to select the desired
mode, and press the ENTER button.
Continue to Saving broadcast TV channels in
the memory (CH Search) or Setting channels
manually (CH Memory) on page E33.
01_LD-26SH3U_gb_01.P65 5/23/2005, 1:44 PM32