Filter
Top Products
E33
EnglishFrançaisEspañolItalianoEspañolEnglish
Setting TV channels
Saving broadcast TV channels in the
memory (CH Search)
"CH Search" allows you to search through
available channels ("Air" or "Cable") in your area.
The tuner saves them to TV memory automatically.
After performing the steps of Selecting broadcast
(Air) or cable TV (Cable) for channel setting on
page E32, continue with the following steps.
1.Press the buttons to select "CH Search",
and press the ENTER button.
MENU [Setup
...
CH Setup]
Air/Cable
CH Search
CH Memory
Searching receivable channels
Ye s N o
2.Press the buttons to select "Yes", and press
the ENTER button.
The tuner will search through all available
channels in your area and save them to the TV
memory.
Note:
- To interrupt the search, press the RETURN
button.
When the search completes, "CH Search"
screen will return.
3.Press the MENU or EXIT button to exit the
screen.
Notes:
- Searching channels are:
Air channels:
VHF: 2 through 13
UHF: 14 through 69
Cable channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC, and IRC)
- During CH Search, the TV will change channels
automatically.
- If you search for channels but cannot receive
any or if you interrupt the search, the channels
that were set previously will be kept.
Setting channels manually
(CH Memory)
"CH Memory" allows you to set the channels you
want one by one.
After performing the steps of Selecting broadcast
(Air) or cable TV (Cable) for channel setting on
page E32, continue with the following steps.
1.Press the buttons to select "CH Memory",
and press the ENTER button.
MENU [Setup
...
CH Setup]
Air/Cable
CH Search
CH Memory
Memorizing broadcast channels
CH No. 11
Fine Tuning [ 0 ]
Skip On Off
2.Press the buttons to select the desired
adjustment item.
To adjust the value, press the buttons.
(See the table below for details.)
3.Press the MENU or EXIT button to exit the
screen.
Item
CH No.
Fine Tuning
Skip
Description
Selects the channel to
adjust.
Adjusts the frequency
slightly to improve the
received signal.
Sets the channel to be
skipped or not when you
select using the CH
buttons.
01_LD-26SH3U_gb_01.P65 5/23/2005, 1:44 PM33