Filter
Top Products
E29
EnglishFrançaisEspañolItalianoEspañolEnglish
Switching display modes (INPUT)
Notes:
- To select AV5 mode, set "DVI Select" to "AV"
(factory setting) beforehand using the Option
menu. (See pages E42 and E45 for information
on using the menus.)
- To select PC DIGITAL mode, set "DVI Select" to
"PC" beforehand using the Option menu. (See
pages E47 and E52 for information on using the
menus.)
POWER
DISPLAY INPUT
TV AV
MENU PC
VOLCH
ENTER
FLASH
BACK
Using the TV, AV, or PC button
1.Press the TV, AV, or PC button.
The TV will switch to the display mode for the
button you pressed.
Notes:
- Each time you press the AV button, the input
changes in the order of AV1 → AV2 → AV3 →
AV4 → AV5 → AV1....
- Each time you press the PC button, the input
toggles between analog and digital.
Basic operations
Using the INPUT button
1.Press the INPUT button.
"INPUT SOURCE" menu will be displayed.
2.Press the INPUT button to select the desired
mode.
You can also use the buttons to select.
Note:
- Between AV1, AV2, and AV3, only the modes
whose respective terminals are connected to
the external equipment are selectable.
Display modes
Number TV mode Displays the TV's image.
The number is the
channel being received.
AV1 AV1 mode Displays the image from
AV2 AV2 mode the equipment connected
AV3 AV3 mode to the respective AV input
AV4 AV4 mode terminals.
(HDMI)
AV5 AV5 mode
(DVI)
PC PC mode Displays the computer's
(analog/digital)
image.
Notes:
- Be sure to select the display mode appropriate
for the connected equipment to display its image
clearly.
- When you turn on the TV, the initial display mode
will be the mode being used when the TV was
last turned off.
- You can also switch display modes using the
INPUT button on the TV.
- In PC mode, when there is no input signal,
"No Signal" is displayed.
01_LD-26SH3U_gb_01.P65 5/23/2005, 1:44 PM29