Sony RDR-HX900 DVD Recorder User Manual


 
30
Notes
When you connect using a component video cord, connect the audio cords to the LINE IN jacks.
Do not connect a hi-definition tuner or similar device using the component video cords. This recorder only accepts
standard definition interlace signals.
Connecting to the LINE 2 IN jacks on the front panel
Connect a VCR or similar recording device to the LINE 2 IN jacks of this recorder. If the equipment has
an S-video jack, you can use an S-video cord instead of an audio/video cord.
z Hint
When the connected equipment outputs only monaural sound, use audio cables that distribute monaural sounds to left/
right channels (not supplied).
Notes
Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
Do not connect the output jack of this recorder to another equipment’s input jack with the other equipment’s output
jack connected to the input jack of this recorder. Noise (feedback) may result.
Pictures containing copy protection signals that prohibit any copying cannot be recorded.
OUTPUT
S VIDEO
AUDIO
LR
VIDEO
VCR, etc.
Audio/video cord
(not supplied)
S-video
cord (not
supplied)
to LINE 2 IN
DVD recorder
: Signal flow