Filter
Top Products
66
“Protect Title”: Protects the title. Select “On”
when the Protection display appears. “ ”
appears next to the protected title. To cancel
the protection, select “Off.”
“Title Name”: Allows you to enter or re-enter
a title name (page 43).
“Set Thumbnail”: Changes the title’s
thumbnail picture that appears in the Title List
(page 38).
“A-B Erase”: Erases a section of the title (see
below).
z Hints
• You can erase multiple titles at one time (page 66), or
erase all of the titles on the disc at once (page 40).
• You can label or re-label DVDs (page 40).
Note
You cannot protect Playlist titles.
Erasing a section of a title
(A-B Erase)
You can select a section (scene) in a title and erase
it. Note that erasing scenes in a title cannot be
undone.
1 After step 2 of “Editing a Title,” select
“A-B Erase” and press ENTER.
The display for setting point A appears.
• When the title is protected, the display asks
for confirmation. To continue, select
“Change,” and when the protection display
appears, select “Off.”
2 Select point A by pressing m/M, and
press ENTER.
The display for setting point B appears.
3 Select point B by pressing m/M, and
press ENTER.
The display asks for confirmation. To reset
either point A or B, select “Change A” or
“Change B,” and go to step 2 or 3.
4 Select “OK,” and press ENTER.
The scene is erased, and the display asks
whether to erase another scene. To continue,
select “Yes,” and repeat from step 2. To finish,
select “No.”
z Hint
A chapter mark is inserted after the scene was erased. The
chapter mark divides the title into separate chapters on
either side of the mark.
Notes
• Images or sound may be momentarily interrupted at the
point where you erase a section of a title.
• Sections shorter than five seconds may not be erased.
• For DVD+RWs, the erased section may be slightly
different from the points you selected.
Erasing multiple titles (Erase Titles)
You can select and erase two or more titles at one
time using the TOOLS menu.
1 Press TITLE LIST to turn on the Title List
menu, and press TOOLS.
The TOOLS menu appears.
2 Select “Erase Titles,” and press ENTER.
The display for selecting titles to be erased
appears.
-
RWVR
+
RW
HDD
A-B Erase (Set point A)
A 0:12:34
B : :
– – –– –
2 5ch 8:00PM - 9:00PM
Playback point
A-B Erase (Set point B)
A 0:12:34
B 0:23:45
A
2 5ch 8:00PM - 9:00PM
-
RWVR
-
RW
Video
+
RW
-
R
+
R
HDD