Filter
Top Products
79
DV/Digital8 Dubbing (DV t HDD/DVD)
Recording an Entire DV/
Digital8 Format Tape (One
Touch Dubbing)
You can record the entire contents of a DV/
Digital8 format tape onto a disc with a single press
of the ONE TOUCH DUBBING button. The
recorder controls the digital video camera for the
whole process, and completes the recording.
◆How chapters are created
The dubbed contents on the disc become one title,
and the title is divided into chapters. For the HDD
and a DVD-RW (VR mode), every shooting on the
tape becomes a chapter on the disc (Auto Scene
Chaptering function). For other discs, the recorder
divides the title in either 6 or 15-minute intervals,
according to the setting in “Auto Chapter” in
Features Setup.
Follow steps 1 to 5 of “Preparing for recording
using the DV IN jack” (page 77), and press
ONE TOUCH DUBBING on the remote.
The recorder rewinds the tape and then starts
recording the tape contents.
When the recording is finished, the recorder
rewinds the tape in the digital video camera.
To stop during recording
Open the remote’s cover and press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
z Hints
• If you set “Finalize Disc” to “Auto” in Features Setup
(page 93), the recorded disc (except DVD-RW(VR
mode)) will automatically be finalized after recording
is finished.
• You can play back a previously recorded title on the
HDD while One Touch Dubbing is in progress.
Notes
• When a blank space between the recordings on the tape
continues for more than five minutes, One Touch
Dubbing ends automatically.
• The recorder records a blank for five minutes before it
stops dubbing. To stop the blank recording, press
x
REC STOP.
-
RWVR
-
RW
Video
+
RW
-
R
+
R
HDD
ONE TOUCH
DUBBING
x
REC STOP