Filter
Top Products
30
Step 7: Easy Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
recorder. If you do not complete Easy Setup, it
will appear each time you turn on your recorder.
Settings are made in the following order.
m
m
m
m
m
1 Turn on the TV.
2 Press "/1.
The recorder turns on.
3 Switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
When connecting the recorder to the TV using
only the antenna cable, see “Setting the RF
Output channel” on page 19.
“Initial setting necessary to operate the DVD
recorder will be made. You can change them
later using Setup.” appears.
• If this message does not appear, select “Easy
Setup” in the “Setup” display to run Easy
Setup (page 107).
4 Press ENTER.
The setup display for selecting the language
used in the on-screen display appears.
5 Select a language, and press ENTER.
The setup display for clock setting appears.
OSD Language Setup
Clock Setup
Tuner and Channel Setup
TV Type Setup
Audio Connection Setup
Finished!
M/m/,,
ENTER
O RETURN
"/1
Select the screen language.
Easy Setup
English
Français
Español
Select a method for setting the clock.
If you select "Auto", this recorder will look
for a time signal when you turn it off.
Easy Setup
Auto
Manual