Filter
Top Products
92
8 Select “Dubbing,” and press ENTER.
9 Select “DVD t Video,” and press ENTER.
The display for confirmation appears.
10
Select “OK,” and press ENTER.
Dubbing starts.
The disc’s menu may appear depending on the
disc when playback of a disc finishes. In this
case, press x STOP to stop dubbing,
otherwise the disc’s menu is recorded until the
tape reaches its end.
To select the tape speed
Press VIDEO to control the VCR, then press REC
MODE repeatedly to select “SP” or “EP.”
“EP” (Extended Play) provides recording time
three times as long as “SP” (Standard Play).
However, “SP” produces better picture and audio
quality.
To select the sound or language
After step 5 above, press AUDIO repeatedly to
select the sound you want, or press SUBTITLE
repeatedly to select the language you want. For
details, see page 59.
To stop dubbing
Press x STOP.
Note that it may take a few seconds for the
recorder to stop dubbing.
z Hints
• You can switch the playback DVD audio while
dubbing.
• The brightness of the playback video may differ from
that during normal DVD playback.
• The DVD playback time may differ slightly from the
VHS tape counter value.
• The audio being played back (main audio, sub audio,
etc.) is the dubbed audio.
Notes
• Dubbing is not possible when “Video” of “Progressive”
is set to “On” in the “Setup” display.
• Dubbing stops in the following cases.
– When the DVD is played back to the end and stops.
– When the DVD deck or the VHS deck is stopped.
– When the tape remaining time runs out.
• The System menu, TOOLS menu, and information
display are not displayed during dubbing.
• Copyrights
– Recordings made from discs and other copyrighted
material are solely for individual enjoyment, and
other unauthorized use is prohibited under copyright
law.
– Unauthorized editing of copyrighted material is
prohibited under copyright law.
Setup
Disc Setting
Edit
Timer
Create Playlist
Edit Playlist
DV Edit
Dubbing
Edit
Title List
10:10 AM
Video --> DVD
DVD --> Video