Filter
Top Products
52
To confirm, change, or cancel timer recording
See “Checking/Changing/Canceling DVD Timer
Settings (Timer List)” on page 55.
To use the Rec Mode Adjust function
When you are recording a program in the Auto
mode and there is not enough available disc space
for the recording, the recorder automatically
adjust the recording mode to enable the entire
program to be recorded.
z Hints
• You can play the recorded program by selecting the
program title in the Title List menu.
• When the start time and the channel or input source to
be recorded are the same but the “RecTo” setting
differs, the program is recorded to both the DVD disc
and the VHS tape.
• You can also display the Timer programming menu as
follows:
1Press SYSTEM MENU.
The System Menu appears.
2Select “Timer,” and press ENTER.
3Select “Timer – Standard,” and press ENTER.
Notes
• To record a cable or satellite program, turn on the cable
box or satellite receiver and select the program you
want to record. Leave the cable box or satellite receiver
turned on until the recorder finishes recording.
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• Before the timer recording starts, “TIMER REC”
flashes in the front panel display.
• Even if a timer recording is started in the condition with
the recorder power on, the recorder power is
automatically turned off when the timer recording
finishes.
• If you attempt to make a timer recording of a copy
protected broadcast, a black screen is recorded.
Recording TV programs using the
VCR Plus+ system
The VCR Plus+ system is a feature that simplifies
setting the timer. Just enter the PlusCode number
listed in the TV program guide. The date, time,
and channel of that program are set automatically.
Before you start, check that the TV and guide
channels are correctly set in “Guide Channel
Setup” of “Tuner Preset” in the “Setup” display
(page 98).
1 Press DVD to control the DVD recorder.
2 Insert a recordable disc.
3 Press VCR Plus+.
If the Timer programming (Standard) menu
appears, press < to switch the display to
“VCR Plus+.”
4 Press the number buttons to enter the
PlusCode number.
If you make a mistake, press CLEAR and re-
enter the correct number.
M/m/</,,
ENTER
VCR Plus+
Number
buttons
x STOP
CLEAR
DVD
SYSTEM
MENU
Setup
Edit
Timer
Set VCR Plus+ Code number. [0~9]
Title List
Disc Setting
Standard
10:10 AM
Timer – VCR Plus+