Filter
Top Products
69
VCR Recording
Checking the remaining time
Press DISPLAY.
A Play mode
B Time counter
C Recording mode
D Remaining time
E Current channel
To check the remaining time of a tape, set “VCR
Function” – “Tape Length” of “Features” in the
“Setup” display correctly (page 104).
Maximum recording time
Notes
• The remaining tape length may not be indicated
accurately for short tapes such as T-20 or T-30, or tapes
recorded in LP mode.
• It may take up to one minute for the VCR to calculate
and display the remaining tape length after you press
DISPLAY.
VCR Timer Recording
(Standard/VCR Plus+)
You can set the timer for a total of 12 programs
together with DVD Timer Recording and VCR
Timer Recording, up to one month in advance.
There are two methods to set the timer: the
standard method and VCR Plus+ method.
• Standard: Set the date, time, and channel of the
program manually.
• VCR Plus+: Enter the PlusCode number
designated for each TV program (page 71).
Note
Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent the
accurate recording of a program.
Setting the timer manually
(Standard)
Tape Length SP EP
T-120 2 hrs 6 hrs
T-160 2 hrs 40 mins 8 hrs
T-180 3 hrs 9 hrs
Stop
0:30:00
SP
Rem 01:30
CH 110
M/m/</,,
ENTER
SYSTEM
MENU
[TIMER]
x STOP
VIDEO
,continued