Filter
Top Products
79
Playing VHS Tapes
Searching Using Various
Functions
The VCR automatically marks the tape with an
index signal at the point where each recording
begins.
You can easily find a specific point using various
search functions.
Note
You cannot use these search functions during DVD
recording.
Searching for the counter 0:00:00
point
To mark a point on the tape that you want to find
later, reset the tape counter to “0:00:00.”
The VCR automatically fast-forwards or rewinds
to the 0:00:00 point on the tape counter.
1 Press VIDEO to control the VCR.
2 Press TOOLS.
The TOOLS menu appears.
3 Select “Go To Zero,” and press ENTER.
The VCR starts searching and automatically
stops at the 0:00:00 point.
Searching for a blank space of the
tape
The VCR automatically searches for the
beginning of a blank space. You can easily find a
point you can start recording from.
1 Press VIDEO to control the VCR.
2 Press TOOLS.
The TOOLS menu appears.
3 Select “End Search,” and press ENTER.
The VCR starts searching and automatically
stops at the beginning of a blank space. If no
blank space is found, the VCR reaches the
end.
Note
The VCR may be unable to recognize the end of a blank
space depending on the length of that blank space.
M/m,
ENTER
TOOLS
H PLAY
VIDEO
ENTER
Enter
Go To Zero
End Search
Forward Intro Scan
Reverse Intro Scan
Move
0:00:00
Go to Zero
ENTER
Enter
Go To Zero
End Search
Forward Intro Scan
Reverse Intro Scan
Move
0:00:13
End search
,continued