Filter
Top Products
Introduction to High-Definition Digital Video Recorder (HD DVR)
7
Rear Panel Connectors
Connection Description
qd
CABLE IN
Connects to a coaxial cable coming directly from your cable TV service outlet.
Connection from a cable box that is supplied by your cable TV service
provider is not recommended.
qf ANT IN
Connects to an over-the-air or terrestrial antenna.
qgComponent Video
OUT (Y P
B PR)
Provides high-definition or standard-definition component video signal to a
Y/P
B/PR-compatible monitor. The COMPONENT OUT connector is not
available if the HDMI OUT connector is connected to an HDMI-compatible
monitor.
qh AUDIO OUT
Provides analog audio signals to a TV or other device.
qjSD OUT: VIDEO
OUT/S VIDEO OUT
Provides standard-definition composite video signal to a DVD-Recorder, VCR
or TV set. For a better quality picture connection, use the S Video jack if it is
available.
✍ Menus and on-screen displays are available from the SD OUT connectors
only when the FORMAT setting is set to SD OUT. With other FORMAT
settings, no menus or on-screen displays are visible.
qkHDMI OUT
Provides an uncompressed all-digital audio/video interface between the HD
DVR and an HDMI-compatible monitor. HDMI (High-Definition Multimedia
Interface) supports either standard-definition or high-definition video, plus
up to 5.1 channels of digital audio. You can use the supplied HDMI to DVI
adapter to supply video to a monitor with a DVI-HDTV input. When using
the adapter, a separate audio connection is required.
✍ The HDMI connector has a higher priority when both the HDMI and
COMPONENT outputs are connected to a monitor(s). To enable the
COMPONENT output, disconnect the HDMI cable from the HDMI OUT
connector.
RE
RL
RM
X
XB
RG
XT
XE
XGRH
RI
RK
(continued)