Sony DHG-HDD250 DVR User Manual


 
28
Operating Instructions
Auto Setup
Before you can enjoy the TV Guide On Screen™ System, you will need to perform the Auto
Setup.
1
When your HD DVR is first powered on, the set up screen will automatically appear.
2
Follow the on screen set up, selecting the types of signals your HD DVR will receive.
3
The HD DVR will automatically search for available stations. This may take up to 30 minutes,
or more, depending on the number and types of channels available. After the auto set up is
completed, the TV Guide On Screen system set up screen appears.
4
Enter your country, zip or postal code and indicate again which types of signals your HD DVR
will receive. You may also select to allow an external VCR to be controlled by your HD DVR.
5
After the TV Guide On Screen™ set up is complete, Listings or correct time information will
not immediately be available. Make sure to turn the HD DVR off overnight and you will begin
to see program guide information appear for your area within 24 hours.
6
Within 24 hours after completing the TV Guide On Screen System setup, you may see a
message asking you to select from several cable TV service providers and subscription service
levels (basic service, premium service, etc.). Select the appropriate service provider and
subscription level to view the correct guide information for your area and subscription.
If you do not see any image, check the connections to the TV. Also check the FORMAT setting by
pressing the FORMAT button until the Front Panel Window displays a Format setting that is compatible
with your TV and TV connections (see page 73 for more information about Format settings).
The TV Guide On Screen system setup must be completed before using other features of the HD DVR.
To continue receiving listings, turn off your HD DVR overnight or when not in use.
The TV Guide On Screen system may display incorrect time and date information until correct
information is received soon after the HD DVR is first connected to a broadcast or cable signal. Correct
time information will typically appear within 24 hours.