Filter
Top Products
80
Operating Instructions
Remote Control
A show that had been set to
Record was not recorded
Check the Recording History list to confirm that the recording had been
scheduled or why it may not have been recorded.
If recording to a VCR, make sure the VCR is turned Off before the recording
begins.
Make sure there is a tape in the VCR.
Check the placement of the G-LINK™ IR Blaster in front of the VCR.
Check the Schedule menu and verify that the show is listed before the
recording begins.
The HD DVR did not tune to
a show that was scheduled
with the Reminder feature
Check the Schedule menu and verify that the show is listed.
A show was set to
Auto-Tune and did not
Check the Schedule menu and verify that the show is listed as a Reminder.
Highlight the show under Listings and do the following:
❏
Press the MENU button on the remote control.
❏
Use the down arrow to highlight Edit Reminder, and press SELECT.
❏
Verify that the Auto-Tune option reads Yes.
❏
The HD DVR must be on at the scheduled time for Auto-Tune.
Symptoms Possible Remedies
Remote control does not
operate
The batteries could be weak. Replace the batteries.
Check the orientation of the batteries.
Move the device switch to the DVR position. You may have inadvertently
moved the device switch to the TV, DVD or AMP position, which changes the
remote control mode.
Make sure the correct Remote Control Codes are set for both the remote
control and for the HD DVR (see page 14).
Make sure the HD DVR’s power cord is connected securely to the wall outlet.
Locate the HD DVR at least 3-4 feet away from fluorescent lights.
Cannot change channels
with the remote control
If you are using the HD DVR remote to change channels, first move the device
switch on the remote control to the DVR position.
Remote control does not
operate non-Sony equipment
If the remote control batteries have been replaced recently, the code numbers
for other manufacturer’s equipment may need to be reset.
There may be more than one code for the equipment that you are attempting
to operate.
There is a possibility that some non-Sony equipment cannot be operated by
your Sony TV remote. You may need to use the equipment’s original remote
control.
Symptoms Possible Remedies