Filter
Top Products
44
DNS
Input DNS setting when it is needed.
Press [OK] button after completing all the settings to apply.
6.2.2. Remote Connection Time Limit
Connection Time Limit
Select “Connection Time Limit” to limit the connection time with Agent Series.
The time limit can be set up to maximum of 120 minutes. For example, to
connect and transmit images through Agent Series for only 30 minutes, select
“Connection Time Limit” and set 30 minutes. When 30 minutes have been
passed, the Agent automatically disables connection.
Auto Disconnect on no activity after
To stop the transmission within the pre-selected time limit when there is no
response due to transmission errors, select “Auto Disconnect on no activity
after” and select the desired time limit. The maximum time limit can be set up
to 20 minutes.
6.2.3. Additional Network Options
Bandwidth Limit
Select this category to limit network transmission speed. The user can
temporarily select bandwidth. Number displays current bandwidth setting.
Remote Overlay Control
Control the live images in RemoteAgent remote controller. Detailed
information settings cannot be used in DVR while controlling the live images
in the RemoteAgent.
Allow Time Synchronization
The RemoteAgent remote controller sets the time of the DVR to be same with
it. The DVR can use the remote notification category to set the time in the
RemoteAgent. So, the RemoteAgent must be registered in the remote
notification category to have the same time with the DVR. The RemoteAgent
transmits the time of the RemoteAgent to the DVR in intervals.
Time Synchronization
Synchronize DVR time with RemoteAgent. If there is RemoteAgent which
designed to be Time Server in same network, it synchronizes time of DVR
once in a day(AM 03:00).
6.2.4. Setup of Port Range
TCP and UDP number can be changed between “1028-60000”. The basic set
up uses Default. It is necessary to reboot after changes