Filter
Top Products
118
e.g.
Registering a disc manually
1) Load a DVD-RAM disc that contains information
you want to add.
2) Press LIBRARY.
3) Press QUICK MENU.
4) Press
/ to select “Library management”,
then press ENTER.
5) Press
/ to select “Add disc”, then press
ENTER.
6) Press
/ to select “Yes”, then press ENTER.
Disc information is registered.
To cancel, select “No”.
Notes
• To use disc information in a DVD-RAM disc recorded on
another device, as the Library Management data of the
recorder, be sure to follow the procedure of “Registering a
disc manually” to add the data to the Library Management
system.
• If you record content on a DVD-RAM disc on the recorder
and edit the content on the other device, Library data of the
disc may be lost or the disc may not function properly.
• When you manually register a disc, several discs in same
number consequently may be registered. In such a case, it
is recommended to change the disc number ( page 57).
Using Library data (Continued)
Library
Maintenance of Library data
The recorder usually controls the Library Management
system automatically. However, in the following cases,
you must maintain and create data manually.
• When you want to add information about a disc, (for
example when you use a DVD-RAM disc recorded
on another device, etc.), to the Library Management
system of the recorder.
→ “Registering a disc manually” (
page 118).
• When you restart the “Library” database.
→ “Erasing Library data” (
page 119).
DVD All Disc No. Summary
Disc Name
No.
Estimated
001
2h02m
45m
BASEBALL GAMES
002
CARTOONS
Current default data rate : SP
1/ 1
D /M
1
4.6
LIBRARY
MENU
6/22 (Tu) 2:49 pm
Quick Menu
AV record quality
Exit
Library management
Specific page jump
Del disc no. from library
Add disc
Delete all DVD-RAM information